- Falcon (1)
- Big John (1)
- G-Man (1)
G-Man Pantera 600
- Needs Sliders.... removed old sliders
- Purchased wrong sliders.... next step return wrong sliders
- Well at time we thought was the wrong sliders... later that evening after mother f-ing filers, it was discovered we were attempting to install Ski-Doo sliders on a Cat...
Big John - 580
- Still unable to start. Removed recoil to flywheel on 12/3
- Purchased flywheel puller from Harbor Freight on 12/9
- Removed Flywheel and found no flywheel key... could this be the issue???
- Next step purchase a flywheel key... also found a coolant hose with a significant cut from rubbing on the recoil line. Part on order.
Falcon - Ski Doo Formula 700
- Crank Case Oil Dry. Bad Seal???
- Removed pan under chain case, chain case cover has hair line crack
- Next Step: Replace or repair chain case cover
12/13 Attendees (number of sleds)
- Falcon (1)
- Big John (1)
- G-Man (1)
G-Man Pantera 600
- Install Sliders, should be 20 minute job according to the shop manual
- 2 hours later, sliders installed... sliders kept splitting during the install. Loosened track, removed idler wheels and WD40'ed the sliders but still having issues.
- The rails were super sharp, so we filed them down and the sliders slipped on.
- Pantera 600 was safely returned home in the back of big blue
Big John - 580
- Director of Parts and Inventory procured a flywheel key at Erie Power.
- Installed key, recoil and can.
- Same issue, unable to get motor to go over 4500 rpm's
- Next step take into shop...
Falcon - Ski Doo Formula 700
- Crank Case Oil Dry. Replace / Repair
- Drained Chain case oil
- Removed Chain Case
- Next Step: Replace or repair chain case cover (note on 12/16 the chain case cover was welded by AAA Welding for $40). Awaiting gasket to re-install.
No comments:
Post a Comment